There remains no doubt regarding the fact that construction sites generate a lot of waste as well as debris. If left unattended, they may result into health hazards. Few wastes are generated directly while others get generated indirectly. Wastes are after all infectious. Thus they need to be treated in the best possible manner.
Classification of Wastes – For Ease! :
Wastes have been categorized in the form of hazardous as well as non-hazardous. Non-hazardous waste materials on construction sites include:
- Insulation and wiring waste
- Rebar and many more.
On the other hand, hazardous wastes include asbestos along with lead, plasterboard and many more. Though meticulous cleaning is possible, it can be easily made out from the name that hazardous waste materials release toxic gases when they get broken down into landfills. Hence they need to be handled in the best possible manner.
How to Reuse Debris and Construction Wastes?
You will be surprised to learn that non-hazardous construction site debris poses some great issues to construction site clean-up due to lack of space for disposal. Landfills get filled up at a fast pace due to which many of them get closed due to full capacity. It is very much important to manage and control wastage in an effective manner to make-up the task of cleaning easier from all angles.
There are numerous methods including reusing and recycling to carry on with this gigantic task. Recycling of construction debris may contribute a lot in reduction of landfill wastes. Some wastes that may be easily recycled include:
- Corrugated cardboard
Cleaning up in case of a recycling project takes place by simply segregating the waste on the basis of specific category. Afterwards, they are sent to the recycling site for further benefits. There are times when recycling may be easily done on the construction site itself. In exceptional cases, wastes comprising of recycling potential gets collected from the site and segregated at the later stage at recycling facility.
What are some of the Best Ways to Clean up Debris from Construction Site?
Are you wondering about the best way to clean up debris of the construction site? Then it is recommended to reuse them. Leftover materials from demolition project like doors, door frames, fixtures and many more need to get reused! It is recommended to identify materials prior carrying out the clean-up task to prevent disposition by mistake.
Whenever it comes to cleaning up of debris on the construction site, several protocols will appear in front of you. To get started, debris needs to be categorized into several broad areas that include:
- Solid wastes
- Hazardous wastes
- Petroleum products
- Fertilizers and so on.
It is very much essential for employees to remain aware of some of the best practices regarding waste management on site and adhere to them. Containers along with areas meant for storage must be inspected for spills, leaks and other malfunctions. Workers need to be properly trained so that handling as well as disposing tasks may take place in an uninterrupted manner. Also, they need to know about the best ways to protect themselves.
Cleaning – Requires a Lot of Preparation
Cleaning sounds to be a piece of cake but at the same time demands lots of preparation. At the time of carrying out the task of cleaning, one must know what the steps to be followed are and what not. At the time of cleaning up of solid wastes, it is advisable not to dump them into any water body or areas at higher altitude.
Hazardous materials may easily get disposed by simply following instructions of the manufacturer. The same concept applies in case of petroleum along with fertilizers and pesticides. Detergents if dumped constantly may result into storming drainage as well as sanitary sewer.
Professionals – Have been well Known to Take Best Care
Professionals will definitely take the best care of each and every aspect o that all sorts of complicacies may be easily avoided. Being aware of latest techniques and methods, they will carry out the operation in an uninterrupted manner. Construction junks when get combined with demolition waste are truly defined as construction & demolition wastes.
Construction debris is usually transported to the landfill in open trailers or trucks. At the same time, they tend to be more homogenous along with less and light weathered in comparison to demolition trash. Construction junks get generated from construction, refurbishment, site clearance and road works. Hence, it can be easily classified into the following classes that include:
- Inert wastes
- Non-inert wastes
Non-inert wastes cover timber, bamboo, vegetation and packaging wastes. Most of them can be easily recycled and disposed. Whereas inert wastes are non-biodegradable! Some of the best examples of inert wastes include:
There are various options in relation to removal of construction debris among which opting for construction dumpsters has been considered to be the best. As soon as the dumpster gets filled and starts overflowing, waste management company will collect them for perusal. Recycling has been considered to be the best option.
Why to Classify Debris?
Debris is classified into various groups so that it becomes easy to recycle. Also, recycling is a cheaper and environment friendly method. Trash removal service providers have been well known to focus on safe as well as useful waste management strategies. They pay high attention to objectives that include:
- Reduction of trash generation
- Maximizing reuse
- Recycling efforts
- Prevention of landfill situation
Each and every step is effective in terms of managing waste and debris at the best. Construction debris generation is truly a major issue. But if carried out in the best manner, it will truly fetch favorable result. The construction industry will truly remain encouraged to control the issue of debris generation.
The construction industry is truly among largest producers of junk. Due cooperation from sides of designers, contractors, suppliers and sub-contractors will contribute a lot in easy reduction of junks. Following good and latest practices will help in keeping the environment clean and tidy.
Author Bio: William L. Vinci is the content manager at warrentrailers.com which specializes in making the best and long running bodies for the trailers and dump trucks. By using the most modern methods and technology and we have best results in service of steel dump trailers, aluminum dump trailers and hydraulic fifth wheels.